玩客云刷amrbian并安装transmission作BT下载及开启samba实现文件下载与共享

您所在的位置：网站首页 › 玩客云 samba › 玩客云刷amrbian并安装transmission作BT下载及开启samba实现文件下载与共享

玩客云刷amrbian并安装transmission作BT下载及开启samba实现文件下载与共享

#玩客云刷amrbian并安装transmission作BT下载及开启samba实现文件下载与共享| 来源: 网络整理| 查看: 265

{mtitle title="ID85821610"/}

事前先上参考文章，我们都是站在巨人的肩膀上

1、玩客云/网心云小白保姆教程电视盒子、armbian、openwrt、双系统齐全【2021/10/12】2、玩客云armbian5.67手动安装qb,tr,samba,FTP实现文件下载与共享 3、如何在Armbian 19.11.3 (debian 10)挂载NTFS移动硬盘

拆开玩客云

撕掉后面黑色的胶条即可用双面胶粘着，很容易就撕开，拧出螺丝，即可取出主板

{mtitle title="主板全貌"/}

从左上角的“V1.3”字样中不难看出，这是1.3版本的主板，如果你的主板没有这个字样，则是1.0版本的主板。两者的短接方式不同，需要注意

{mtitle title="V1.3短接的地方"/}

{mtitle title="V1.0短接的地方"/}图源：https://www.youtube.com/watch?v=qy9_xCs4oS4

安装Amlogic USB Burning Tool

{cloud title="Amlogic_USB_Burning_Tool_v3.1.0" type="default" url="https://cloud.kanoer.net/Software/Windows/Amlogic_USB_Burning_Tool_v3.1.0/" password=""/}

amrbian镜像下载

{cloud title="armbian5.67" type="default" url="https://cloud.kanoer.net/Img/Linux/armbian/" password=""/}

开始刷机

1、使用双公头usb线一头连接玩客云靠近hdmi接口的usb接口，一头连接至电脑，台式机请连接后面的USB口，暂时不要通电。2、打开usb burnning tool软件，选择刚才下载好的镜像

{mtitle title="确认如图设置"/}3、使用镊子按照下图（V1.3版主板）短接触点，并保持不要松手，给玩客云通电电脑会有连接成功声音及图示，显示连接成功后松开短接点，点击软件上“开始”如显示红字错误，可以将usb线拨下停2秒再插上，重新短接触点看见刷机进度进行后松手（放心这个刷不坏），整个过程约3～5分钟，待软件上显示烧录成功后，点击停止，并关闭软件，拨下usb线，断开电源。

开始使用amrbian

将玩客云连上网线和电源，系统会自行启动。查看路由器后台，获取玩客云IP地址打开SSH工具，登入到amrbian，默认用户：root，默认密码：1234第一次登入会要求更改root账户密码，因为我已经更改过了，所以没有提示。更改的时候，第一次输入的是原始密码，即：1234，然后回车，输入新的密码，回车，再次输入新的密码，完成。

安装transmission

输入命令 apt install transmission-daemon

输入 y 进行下载安装

root@OneCloud:~# apt install transmission-daemon Reading package lists... Done Building dependency tree Reading state information... Done The following additional packages will be installed: libevent-2.0-5 libminiupnpc10 libnatpmp1 transmission-common Suggested packages: minissdpd natpmp-utils Recommended packages: minissdpd transmission-cli The following NEW packages will be installed: libevent-2.0-5 libminiupnpc10 libnatpmp1 transmission-common transmission-daemon 0 upgraded, 5 newly installed, 0 to remove and 129 not upgraded. Need to get 642 kB of archives. After this operation, 1,578 kB of additional disk space will be used. Do you want to continue? [Y/n] y Get:1 http://security.debian.org stretch/updates/main armhf transmission-common all 2.92-2+deb9u2 [288 kB] Get:2 http://httpredir.debian.org/debian stretch/main armhf libevent-2.0-5 armhf 2.0.21-stable-3 [134 kB] Get:3 http://httpredir.debian.org/debian stretch/main armhf libminiupnpc10 armhf 1.9.20140610-4 [25.7 kB] Get:4 http://httpredir.debian.org/debian stretch/main armhf libnatpmp1 armhf 20110808-4+b1 [8,338 B] Get:5 http://security.debian.org stretch/updates/main armhf transmission-daemon armhf 2.92-2+deb9u2 [186 kB] Fetched 642 kB in 33s (18.9 kB/s) Selecting previously unselected package transmission-common. (Reading database ... 30447 files and directories currently installed.) Preparing to unpack .../transmission-common_2.92-2+deb9u2_all.deb ... Unpacking transmission-common (2.92-2+deb9u2) ... Selecting previously unselected package libevent-2.0-5:armhf. Preparing to unpack .../libevent-2.0-5_2.0.21-stable-3_armhf.deb ... Unpacking libevent-2.0-5:armhf (2.0.21-stable-3) ... Selecting previously unselected package libminiupnpc10:armhf. Preparing to unpack .../libminiupnpc10_1.9.20140610-4_armhf.deb ... Unpacking libminiupnpc10:armhf (1.9.20140610-4) ... Selecting previously unselected package libnatpmp1:armhf. Preparing to unpack .../libnatpmp1_20110808-4+b1_armhf.deb ... Unpacking libnatpmp1:armhf (20110808-4+b1) ... Selecting previously unselected package transmission-daemon. Preparing to unpack .../transmission-daemon_2.92-2+deb9u2_armhf.deb ... Unpacking transmission-daemon (2.92-2+deb9u2) ... Setting up libminiupnpc10:armhf (1.9.20140610-4) ... Setting up libnatpmp1:armhf (20110808-4+b1) ... Setting up transmission-common (2.92-2+deb9u2) ... Processing triggers for libc-bin (2.24-11+deb9u3) ... Processing triggers for systemd (232-25+deb9u6) ... Processing triggers for man-db (2.7.6.1-2) ... Setting up libevent-2.0-5:armhf (2.0.21-stable-3) ... Setting up transmission-daemon (2.92-2+deb9u2) ... Created symlink /etc/systemd/system/multi-user.target.wants/transmission-daemon.service → /lib/systemd/system/transmission-daemon.service. Processing triggers for libc-bin (2.24-11+deb9u3) ... Processing triggers for systemd (232-25+deb9u6) ... root@OneCloud:~#

安装完成,输入IP:9091访问transmission web控制台，不出意外会被拒绝连接修改配置文件： /etc/transmission-daemon/settings.json将 "rpc-whitelist": "127.0.0.1" 改成 "rpc-whitelist": "*" 表示允许所有IP访问，保存文件。重启transmission： systemctl restart transmission-daemon

汉化transmission

项目地址：https://github.com/ronggang/transmission-web-control下载安装脚本 wget https://github.com/ronggang/transmission-web-control/raw/master/release/install-tr-control-cn.sh执行安装输入 1 安装 bash install-tr-control-cn.sh完成后重启 systemctl restart transmission-daemon以下为全程演示：

root@OneCloud:~# wget https://github.com/ronggang/transmission-web-control/raw/master/release/install-tr-control-cn.sh --2021-10-16 05:42:24-- https://github.com/ronggang/transmission-web-control/raw/master/release/install-tr-control-cn.sh Resolving github.com (github.com)... 20.205.243.166 Connecting to github.com (github.com)|20.205.243.166|:443... connected. HTTP request sent, awaiting response... No data received. Retrying. --2021-10-16 05:42:40-- (try: 2) https://github.com/ronggang/transmission-web-control/raw/master/release/install-tr-control-cn.sh Connecting to github.com (github.com)|20.205.243.166|:443... connected. HTTP request sent, awaiting response... 302 Found Location: https://raw.githubusercontent.com/ronggang/transmission-web-control/master/release/install-tr-control-cn.sh [following] --2021-10-16 05:42:40-- https://raw.githubusercontent.com/ronggang/transmission-web-control/master/release/install-tr-control-cn.sh Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 185.199.109.133, 185.199.111.133, 185.199.110.133, ... Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|185.199.109.133|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 13561 (13K) [text/plain] Saving to: ‘install-tr-control-cn.sh’ install-tr-control-cn.sh 100%[============================================================================>] 13.24K 3.02KB/s in 4.4s 2021-10-16 05:42:48 (3.02 KB/s) - ‘install-tr-control-cn.sh’ saved [13561/13561] root@OneCloud:~# bash install-tr-control-cn.sh /usr/bin/whoami 欢迎使用 Transmission Web Control 中文安装脚本。官方帮助文档：https://github.com/ronggang/transmission-web-control/wiki 安装脚本版本：1.2.3 1. 安装最新的发布版本（release）； 2. 安装指定版本，可用于降级； 3. 恢复到官方UI； 4. 重新下载安装脚本（install-tr-control-cn.sh）； 5. 检测 Transmission 是否已启动； 6. 指定安装目录； 9. 安装最新代码库中的内容（master）； =================== 0. 退出安装；请输入对应的数字：1 --2021-10-16 05:48:03-- https://api.github.com/repos/ronggang/transmission-web-control/releases/latest Resolving api.github.com (api.github.com)... 192.30.255.116 Connecting to api.github.com (api.github.com)|192.30.255.116|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 5884 (5.7K) [application/json] Saving to: ‘STDOUT’ - 100%[============================================================================>] 5.75K --.-KB/s in 0.003s 2021-10-16 05:48:05 (2.16 MB/s) - written to stdout [5884/5884] > == 开始 == > > 当前 Transmission Web 目录为: /usr/share/transmission/web > 您正在使用指定版本安装，版本： 1.6.1-update1 > 正在尝试指定版本 1.6.1-update1 > 正在下载 Transmission Web Control... --2021-10-16 05:48:06-- https://github.com/ronggang/transmission-web-control/archive/v1.6.1-update1.tar.gz Resolving github.com (github.com)... 20.205.243.166 Connecting to github.com (github.com)|20.205.243.166|:443... connected. HTTP request sent, awaiting response... 302 Found Location: https://codeload.github.com/ronggang/transmission-web-control/tar.gz/v1.6.1-update1 [following] --2021-10-16 05:48:06-- https://codeload.github.com/ronggang/transmission-web-control/tar.gz/v1.6.1-update1 Resolving codeload.github.com (codeload.github.com)... 20.205.243.165 Connecting to codeload.github.com (codeload.github.com)|20.205.243.165|:443... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [application/x-gzip] Saving to: ‘v1.6.1-update1.tar.gz’ v1.6.1-update1.tar.gz [ ] 1.15M 1.74MB/s in 0.7s 2021-10-16 05:48:08 (1.74 MB/s) - ‘v1.6.1-update1.tar.gz’ saved [1206252] > 下载完成，正在准备安装... > 正在解压安装包... > 正在复制安装包... > 正在设置权限，大约需要一分钟 ... > Transmission Web Control 安装完成! > 正在清理安装包... > 安装脚本执行完成。如遇到问题请查看：https://github.com/ronggang/transmission-web-control/wiki > == 结束 == root@OneCloud:~# systemctl restart transmission-daemon root@OneCloud:~#

刷新页面，可以看到汉化完成

挂载移动硬盘

连接好硬盘后输入命令 fdisk -l 查看硬盘状态

root@OneCloud:~# fdisk -l Disk /dev/zram0: 50 MiB, 52428800 bytes, 12800 sectors Units: sectors of 1 * 4096 = 4096 bytes Sector size (logical/physical): 4096 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk /dev/mmcblk0: 7.3 GiB, 7818182656 bytes, 15269888 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0x0000fde5 Device Boot Start End Sectors Size Id Type /dev/mmcblk0p1 16065 14964479 14948415 7.1G 83 Linux Disk /dev/mmcblk0boot1: 4 MiB, 4194304 bytes, 8192 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0x0000fde5 Device Boot Start End Sectors Size Id Type /dev/mmcblk0boot1p1 16065 7727264 7711200 3.7G b W95 FAT32 Disk /dev/mmcblk0boot0: 4 MiB, 4194304 bytes, 8192 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0x0000fde5 Device Boot Start End Sectors Size Id Type /dev/mmcblk0boot0p1 16065 7727264 7711200 3.7G b W95 FAT32 Disk /dev/sda: 298.1 GiB, 320072933376 bytes, 625142448 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: gpt Disk identifier: 0F191B0D-5858-9090-8081-828310111213 Device Start End Sectors Size Type /dev/sda1 2048 625137344 625135297 298.1G Microsoft basic data root@OneCloud:~#

可以看到300G的硬盘已经被系统识别，但是文件格式是NTFS格式，无法直接挂载，我们需要安装 ntfs-3g 来挂载。输入命令 apt-get install ntfs-3g 安装

root@OneCloud:~# apt-get install ntfs-3g Reading package lists... Done Building dependency tree Reading state information... Done The following additional packages will be installed: libntfs-3g871 The following packages will be upgraded: libntfs-3g871 ntfs-3g 2 upgraded, 0 newly installed, 0 to remove and 127 not upgraded. Need to get 0 B/557 kB of archives. After this operation, 0 B of additional disk space will be used. Do you want to continue? [Y/n] y (Reading database ... 30587 files and directories currently installed.) Preparing to unpack .../ntfs-3g_1%3a2016.2.22AR.1+dfsg-1+deb9u1_armhf.deb ... Unpacking ntfs-3g (1:2016.2.22AR.1+dfsg-1+deb9u1) over (1:2016.2.22AR.1+dfsg-1) ... Preparing to unpack .../libntfs-3g871_1%3a2016.2.22AR.1+dfsg-1+deb9u1_armhf.deb ... Unpacking libntfs-3g871 (1:2016.2.22AR.1+dfsg-1+deb9u1) over (1:2016.2.22AR.1+dfsg-1) ... Processing triggers for initramfs-tools (0.130) ... ln: failed to create hard link '/boot/initrd.img-3.10.108.dpkg-bak' => '/boot/initrd.img-3.10.108': Operation not permitted update-initramfs: Generating /boot/initrd.img-3.10.108 update-initramfs: Converting to u-boot format Processing triggers for libc-bin (2.24-11+deb9u3) ... Processing triggers for man-db (2.7.6.1-2) ... Setting up libntfs-3g871 (1:2016.2.22AR.1+dfsg-1+deb9u1) ... Setting up ntfs-3g (1:2016.2.22AR.1+dfsg-1+deb9u1) ... Processing triggers for libc-bin (2.24-11+deb9u3) ... Processing triggers for initramfs-tools (0.130) ... ln: failed to create hard link '/boot/initrd.img-3.10.108.dpkg-bak' => '/boot/initrd.img-3.10.108': Operation not permitted update-initramfs: Generating /boot/initrd.img-3.10.108 update-initramfs: Converting to u-boot format root@OneCloud:~#

创建挂载点： mkdir /mnt/sda1挂载硬盘到sda1文件夹： mount -t ntfs-3g /dev/sda1 /mnt/sda1输入 df-h 查看挂载情况如下，磁盘已被成功挂载

root@OneCloud:~# mount -t ntfs-3g /dev/sda1 /mnt/sda1 root@OneCloud:~# df -h Filesystem Size Used Avail Use% Mounted on udev 395M 0 395M 0% /dev tmpfs 80M 5.5M 74M 7% /run /dev/system 6.7G 872M 5.8G 13% / tmpfs 397M 0 397M 0% /dev/shm tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs 397M 0 397M 0% /sys/fs/cgroup tmpfs 397M 4.0K 397M 1% /tmp /dev/boot 32M 15M 18M 46% /boot /dev/zram0 49M 1.4M 44M 4% /var/log tmpfs 80M 0 80M 0% /run/user/0 /dev/sda1 299G 97G 202G 33% /mnt/sda1 安装samba

输入命令： apt install samba ，输入 y 确认安装，消耗的时间视网络情况而异

root@OneCloud:~# apt install samba Reading package lists... Done Building dependency tree Reading state information... Done The following additional packages will be installed: libavahi-client3 libavahi-common-data libavahi-common3 libcups2 libfile-copy-recursive-perl libldb1 libpython2.7 libpython2.7-minimal libpython2.7-stdlib libtalloc2 libtdb1 libtevent0 libwbclient0 python-crypto python-dnspython python-ldb python-samba python-talloc python-tdb python2.7 python2.7-minimal samba-common samba-common-bin samba-libs tdb-tools update-inetd Suggested packages: cups-common python-crypto-dbg python-crypto-doc python-gpgme python2.7-doc binfmt-support bind9 bind9utils ctdb ldb-tools smbldap-tools winbind ufw heimdal-clients Recommended packages: attr samba-dsdb-modules samba-vfs-modules The following NEW packages will be installed: libavahi-client3 libavahi-common-data libavahi-common3 libcups2 libfile-copy-recursive-perl libldb1 libpython2.7 libtalloc2 libtdb1 libtevent0 libwbclient0 python-crypto python-dnspython python-ldb python-samba python-talloc python-tdb samba samba-common samba-common-bin samba-libs tdb-tools update-inetd The following packages will be upgraded: libpython2.7-minimal libpython2.7-stdlib python2.7 python2.7-minimal 4 upgraded, 23 newly installed, 0 to remove and 123 not upgraded. Need to get 7,317 kB/13.2 MB of archives. After this operation, 41.8 MB of additional disk space will be used. Do you want to continue? [Y/n] y Get:1 http://security.debian.org stretch/updates/main armhf samba-libs armhf 2:4.5.16+dfsg-1+deb9u4 [4,523 kB] Get:2 http://security.debian.org stretch/updates/main armhf python-samba armhf 2:4.5.16+dfsg-1+deb9u4 [1,173 kB] Get:3 http://security.debian.org stretch/updates/main armhf samba-common all 2:4.5.16+dfsg-1+deb9u4 [175 kB] Get:4 http://security.debian.org stretch/updates/main armhf samba-common-bin armhf 2:4.5.16+dfsg-1+deb9u4 [563 kB] Get:5 http://security.debian.org stretch/updates/main armhf samba armhf 2:4.5.16+dfsg-1+deb9u4 [883 kB] Fetched 6,752 kB in 1s (5,645 kB/s) Preconfiguring packages ... Selecting previously unselected package libwbclient0:armhf. (Reading database ... 30587 files and directories currently installed.) Preparing to unpack .../00-libwbclient0_2%3a4.5.16+dfsg-1+deb9u4_armhf.deb ... Unpacking libwbclient0:armhf (2:4.5.16+dfsg-1+deb9u4) ... Preparing to unpack .../01-python2.7_2.7.13-2+deb9u5_armhf.deb ... Unpacking python2.7 (2.7.13-2+deb9u5) over (2.7.13-2+deb9u3) ... Preparing to unpack .../02-libpython2.7-stdlib_2.7.13-2+deb9u5_armhf.deb ... Unpacking libpython2.7-stdlib:armhf (2.7.13-2+deb9u5) over (2.7.13-2+deb9u3) ... Preparing to unpack .../03-python2.7-minimal_2.7.13-2+deb9u5_armhf.deb ... Unpacking python2.7-minimal (2.7.13-2+deb9u5) over (2.7.13-2+deb9u3) ... Preparing to unpack .../04-libpython2.7-minimal_2.7.13-2+deb9u5_armhf.deb ... Unpacking libpython2.7-minimal:armhf (2.7.13-2+deb9u5) over (2.7.13-2+deb9u3) ... Selecting previously unselected package python-dnspython. Preparing to unpack .../05-python-dnspython_1.15.0-1+deb9u1_all.deb ... Unpacking python-dnspython (1.15.0-1+deb9u1) ... Selecting previously unselected package python-crypto. Preparing to unpack .../06-python-crypto_2.6.1-7_armhf.deb ... Unpacking python-crypto (2.6.1-7) ... Selecting previously unselected package libtalloc2:armhf. Preparing to unpack .../07-libtalloc2_2.1.8-1_armhf.deb ... Unpacking libtalloc2:armhf (2.1.8-1) ... Selecting previously unselected package libtdb1:armhf. Preparing to unpack .../08-libtdb1_1.3.11-2_armhf.deb ... Unpacking libtdb1:armhf (1.3.11-2) ... Selecting previously unselected package libtevent0:armhf. Preparing to unpack .../09-libtevent0_0.9.31-1_armhf.deb ... Unpacking libtevent0:armhf (0.9.31-1) ... Selecting previously unselected package libldb1:armhf. Preparing to unpack .../10-libldb1_2%3a1.1.27-1+deb9u2_armhf.deb ... Unpacking libldb1:armhf (2:1.1.27-1+deb9u2) ... Selecting previously unselected package libpython2.7:armhf. Preparing to unpack .../11-libpython2.7_2.7.13-2+deb9u5_armhf.deb ... Unpacking libpython2.7:armhf (2.7.13-2+deb9u5) ... Selecting previously unselected package python-ldb. Preparing to unpack .../12-python-ldb_2%3a1.1.27-1+deb9u2_armhf.deb ... Unpacking python-ldb (2:1.1.27-1+deb9u2) ... Selecting previously unselected package python-tdb. Preparing to unpack .../13-python-tdb_1.3.11-2_armhf.deb ... Unpacking python-tdb (1.3.11-2) ... Selecting previously unselected package python-talloc. Preparing to unpack .../14-python-talloc_2.1.8-1_armhf.deb ... Unpacking python-talloc (2.1.8-1) ... Selecting previously unselected package libavahi-common-data:armhf. Preparing to unpack .../15-libavahi-common-data_0.6.32-2_armhf.deb ... Unpacking libavahi-common-data:armhf (0.6.32-2) ... Selecting previously unselected package libavahi-common3:armhf. Preparing to unpack .../16-libavahi-common3_0.6.32-2_armhf.deb ... Unpacking libavahi-common3:armhf (0.6.32-2) ... Selecting previously unselected package libavahi-client3:armhf. Preparing to unpack .../17-libavahi-client3_0.6.32-2_armhf.deb ... Unpacking libavahi-client3:armhf (0.6.32-2) ... Selecting previously unselected package libcups2:armhf. Preparing to unpack .../18-libcups2_2.2.1-8+deb9u6_armhf.deb ... Unpacking libcups2:armhf (2.2.1-8+deb9u6) ... Selecting previously unselected package samba-libs:armhf. Preparing to unpack .../19-samba-libs_2%3a4.5.16+dfsg-1+deb9u4_armhf.deb ... Unpacking samba-libs:armhf (2:4.5.16+dfsg-1+deb9u4) ... Selecting previously unselected package python-samba. Preparing to unpack .../20-python-samba_2%3a4.5.16+dfsg-1+deb9u4_armhf.deb ... Unpacking python-samba (2:4.5.16+dfsg-1+deb9u4) ... Selecting previously unselected package samba-common. Preparing to unpack .../21-samba-common_2%3a4.5.16+dfsg-1+deb9u4_all.deb ... Unpacking samba-common (2:4.5.16+dfsg-1+deb9u4) ... Selecting previously unselected package samba-common-bin. Preparing to unpack .../22-samba-common-bin_2%3a4.5.16+dfsg-1+deb9u4_armhf.deb ... Unpacking samba-common-bin (2:4.5.16+dfsg-1+deb9u4) ... Selecting previously unselected package tdb-tools. Preparing to unpack .../23-tdb-tools_1.3.11-2_armhf.deb ... Unpacking tdb-tools (1.3.11-2) ... Selecting previously unselected package libfile-copy-recursive-perl. Preparing to unpack .../24-libfile-copy-recursive-perl_0.38-1_all.deb ... Unpacking libfile-copy-recursive-perl (0.38-1) ... Selecting previously unselected package update-inetd. Preparing to unpack .../25-update-inetd_4.44_all.deb ... Unpacking update-inetd (4.44) ... Selecting previously unselected package samba. Preparing to unpack .../26-samba_2%3a4.5.16+dfsg-1+deb9u4_armhf.deb ... Unpacking samba (2:4.5.16+dfsg-1+deb9u4) ... Setting up python-dnspython (1.15.0-1+deb9u1) ... Setting up libtdb1:armhf (1.3.11-2) ... Setting up libwbclient0:armhf (2:4.5.16+dfsg-1+deb9u4) ... Setting up python-crypto (2.6.1-7) ... Processing triggers for mime-support (3.60) ... Setting up samba-common (2:4.5.16+dfsg-1+deb9u4) ... Creating config file /etc/samba/smb.conf with new version Processing triggers for libc-bin (2.24-11+deb9u3) ... Processing triggers for systemd (232-25+deb9u6) ... Setting up tdb-tools (1.3.11-2) ... update-alternatives: using /usr/bin/tdbbackup.tdbtools to provide /usr/bin/tdbbackup (tdbbackup) in auto mode Processing triggers for man-db (2.7.6.1-2) ... Setting up libtalloc2:armhf (2.1.8-1) ... Setting up libpython2.7-minimal:armhf (2.7.13-2+deb9u5) ... Setting up libpython2.7-stdlib:armhf (2.7.13-2+deb9u5) ... Setting up python2.7-minimal (2.7.13-2+deb9u5) ... Setting up libfile-copy-recursive-perl (0.38-1) ... Setting up libavahi-common-data:armhf (0.6.32-2) ... Setting up update-inetd (4.44) ... Setting up python2.7 (2.7.13-2+deb9u5) ... Setting up libtevent0:armhf (0.9.31-1) ... Setting up libpython2.7:armhf (2.7.13-2+deb9u5) ... Setting up libavahi-common3:armhf (0.6.32-2) ... Setting up python-talloc (2.1.8-1) ... Setting up python-tdb (1.3.11-2) ... Setting up libldb1:armhf (2:1.1.27-1+deb9u2) ... Setting up libavahi-client3:armhf (0.6.32-2) ... Setting up libcups2:armhf (2.2.1-8+deb9u6) ... Setting up python-ldb (2:1.1.27-1+deb9u2) ... Setting up samba-libs:armhf (2:4.5.16+dfsg-1+deb9u4) ... Setting up python-samba (2:4.5.16+dfsg-1+deb9u4) ... Setting up samba-common-bin (2:4.5.16+dfsg-1+deb9u4) ... Setting up samba (2:4.5.16+dfsg-1+deb9u4) ... Adding group `sambashare' (GID 115) ... Done. Samba is not being run as an AD Domain Controller, masking samba-ad-dc-service. Please ignore the following error about deb-systemd-helper not finding samba-ad-dc-service. Created symlink /etc/systemd/system/multi-user.target.wants/nmbd.service → /lib/systemd/system/nmbd.service. Failed to preset unit: Unit file /etc/systemd/system/samba-ad-dc.service is masked. /usr/bin/deb-systemd-helper: error: systemctl preset failed on samba-ad-dc.service: No such file or directory Created symlink /etc/systemd/system/multi-user.target.wants/smbd.service → /lib/systemd/system/smbd.service. Processing triggers for libc-bin (2.24-11+deb9u3) ... Processing triggers for systemd (232-25+deb9u6) ... root@OneCloud:~#

添加用户和密码，输入 smbpasswd -a root #root是想用的samba账号，接着会让你输入两次密码，输入即可。编辑 /etc/samba/smb.conf 文件，在末尾处添加以下内容：

[share] comment = 1T-share # 共享目录 path = /mnt/sda1 create mask = 0700 directory mask = 0700 # 用于登录的账户 valid users = root force user = root force group = root # 是否公开分享 public = yes # 是否允许来宾用户访问 guest ok = yes # 是否只读 read only = no # 是否可被浏览 browseable = yes available = yes writable = yes

保存后重启samba服务 systemctl restart smbd ，再通过电脑添加网络位置，用户选择root，输入你设置好的密码即可。

{mtitle title="成功访问samba服"/}

至此，本文完结。

【本文地址】

玩客云刷amrbian并安装transmission作BT下载及开启samba实现文件下载与共享

玩客云刷amrbian并安装transmission作BT下载及开启samba实现文件下载与共享

今日新闻

推荐新闻